Why you should upgrade your appliances
“Why should I spend money now to upgrade my furnace/water heater/boiler/swamp cooler/air conditioner?”
I am sure you have heard all of the reasons why it is important to change these older appliances RIGHT NOW, but let me review the obvious reasons and then give you a few compelling ones you may not have heard:
Let’s begin with the reasons you may already have heard:
1. Federal tax credits up to $1,500.00
2. Utility rebates direct to you in the form of a check.
3. Life safety because the old appliance may be leaking toxic gases in your home
4. Increase efficiency (and a reduced energy bill every month)
5. Peace of mind knowing you do not have to wait for a disaster before you changes out the appliance.
These are the top five reasons that you may have read in your newspaper, on a radio ad or on an advertising piece you have received in the mail.
Let me tell you why I feel it makes sense to upgrade or buy better quality appliances as soon as you can. First, now that more energy efficient appliances are becoming more affordable, the cost of putting in an 80% efficient appliance often is about the same as a 95% one. If there is a financial incentive to put in the better quality, you may get a longer life out of the new one than you would otherwise and for close to the same price.
A singular point not mentioned in any discussion about a conversion from old to new is very basic: upgrading to better and more efficient equipment simply adds to our everyday comfort. We live in our homes year in and year out and we rely on that equipment for consistent hot water, regular heating and cooling. Being comfortable in our home is found in the simple yet important things like the temperature being controlled better with the new furnace or boiler system or the hot water temperature is consistent after the third shower in a row by family members. Today’s equipment gives us better heating and cooling and more consistent hot water than we have ever had in the past which is a valid reason alone for making the upgrade. Yes, there are brands that claim to offer certain performance and may not perform as well as those claims in actual use, but do your research and check out what are proven brands and models are available and you can enjoy better “creature comfort” than ever before. One of the free services that I can provide to you through Kimmel Service is help in guiding you to the best appliances and equipment that meet both your budget and lifestyle needs.
When we install a higher quality piece of HVAC equipment and tell the customer the benefits (and differences) from their previous equipment they are amazed and pleased. One of the first comments that customers tell me is that they have been living in a cold or warm house for so many years that this will be a pleasant change. They of course want to save money but often they will think “now that I have a furnace which puts out better heat at a lower price, I will move my thermostat up a few degrees and not pay any more money”. This is a common misunderstanding, but you have not studied you’re your new furnace or boiler can do for you without turning up the thermostat.
I encourage the customer to some time reading the literature for the equipment and talking to the experienced technicians or company managers so the customer is aware what it takes to get superior comfort at a better that expected utility bill and to make the best selection.
Also, did you know that adding a humidifier can actually lower your thermostat temperature? Yes, you can feel just as comfortable at a lower temperature if the humidity level in your home is increased. We experience a two to four degree drop in temperature when you raise the humidity level in your Colorado home.
If you have any questions or want input and guidance regarding your upcoming purchase of new appliances or equipment, please feel free to give me a call.
Thanks,
Tom D’Agostino, Kimmel Service Manger, Denver 303.952.8668 Summit & Eagle County 970.328.6001
Water Heaters and How They Age
When we get calls from homeowners regarding their water heaters, often the reason for calling is that they report getting less and less water from their tank type heaters. There are two issues involved when I hear this complaint. First, the temperature of the water in the main drops in the winter, so it takes more energy to make the same amount of hot water in colder months than in the summer. But the most common reason for this problem is that their heater is getting filled up with mineral deposits.
How do minerals get into the heater and why are they accumulating? The best way to answer this is to begin by explaining how water heaters work. The tank is typically a steel tank with fiberglass liner that was sprayed inside the tank as part of the manufacturing process. The function of the fiberglass liner is to help protect the steel tank from rusting prematurely, but the liner will eventually wear out and the tank will begin rusting.
This process begins with the burners. The burner is at the bottom of the tank and there is a sensor in the tank which measures the temperature of the water and turns the burners on and off. Keeping the heater at the lowest possible temperature to meet your needs is very economical, and also lengthens the life of the heater. When the burners fire up and the tank is producing the desired hot water, you are also driving out the dissolved minerals that are in suspension in your water. The quality of water can vary greatly here in Colorado, and if you do not have some type of water treatment equipment (we will discuss choosing these in a future blog) then these minerals within the water will drop out of suspension when you exceed 138 degrees and begin building up. When the minerals turn back into solids, they become heavier than water and float to the bottom of the heater tank. When the flames from the burners hit the bottom of the steel tank, the metal attracts the dissolved metals and minerals and eventually clings to the tank and become a growing mass of solid matters. This solid matter usually contains calcium, iron and other components mixed together.
If you do not flush out the tank from the drain valve from the very beginning when the tank was new, then don’t start after the solid masses have accumulated. The reason is that these solid particles will clog your drain valve and you will have to call your plumber to replace this clogged valve. If you have the situation where the heater already has accumulated mineral deposits, one way to deal with this it to turn your heater temperature as low as you can (approximately 120 degrees) to keep your heater functioning as long as possible.
If you hear gurgling noises coming from your water heater tank, this indicates that the minerals have now accumulated to the point that little pockets of water have been caught within the mass of minerals and they are flashing to steam. When you hear this, it is a good indication that your water heater is failing. When this situation occurs, the heater now has to work harder and harder to provide the hot water to meet your needs. This can also make your gas bill rise as the efficiency of the hot water heater diminishes. If your water heaters has been in use for 10 – 12 years, most often it is at this point of mineral buildup and decline.
When you notice these problems, please call me at Kimmel Mechanical so we can help you select a state of the art water heater to replace the old one before it fails. Call Tom in Denver, Colorado at 303-952-8668 and in Summit County or Eagle County Colorado at 970-328-6001 – it will be my pleasure to work with you and help you resolve your water heater issues and keep your home running smoothly.